This listing is for the Hardware + 3D Printed Parts needed to build the complete full version of the “Bicycle BoosterPack” as seen on Instructables.com.
The full kit contains all of the parts above photographed parts exactly as shown (but in black). Due to the highly configurable nature of the product, kit is provided partially assembled.
This kit contains 90 total parts (46 unique parts as listed below) which is all the hardware needed to build the full version of the bicycle boosterpack in any configuration. (Note that this does NOT include the electronic parts required to finish the device.)
The complete list of required electronics can be purchased from 3rd party suppliers I recommend in the BoosterPack BOM here.
| (FULL KIT) PACKING LIST |
| Line Item |
Description |
QTY |
| 001 |
Frame Tube, Aluminum |
1 |
| 002 |
Screw, Phillips Thread-Forming |
8 |
| 003 |
Barrel Nut (aka cross dowel) |
2 |
| 004 |
Bolt, 1/4″ Thread, 3″ Long |
2 |
| 005 |
Nut 1/4″ |
1 |
| 006 |
Nylock Nut 1/4″ |
1 |
| 007 |
Shoulder Bolt |
1 |
| 008 |
Lock Nut 5/16″ |
2 |
| 009 |
Set Screw, 3/8″ Long |
6 |
| 010 |
Set Screw, 5/8″ Long |
8 |
| 011 |
Spring Pin, 1/4″ |
1 |
| 012 |
Spring |
1 |
| 013 |
Bolt, 5/16″ Thread, 2-1/2″ Length |
1 |
| 014 |
Velcro Strips, 13.5″, double sided |
4 |
| 015 |
Hook OR Loop Strip, 4” Adhesive Backed |
1 |
| 016 |
Machine Screw-Metric large |
4 |
| 017 |
Machine Screw- Metric small |
4 |
| 018 |
Hex Key small |
1 |
| 019 |
Hex Key large |
1 |
| 020 |
Split Washer – small |
4 |
| 021 |
Hose Clamp |
1 |
| 022 |
Velcro Wire Ties |
4 |
| 023 |
Wire Harness, 30″ |
1 |
| 024 |
Split Washer large |
4 |
| 025 |
Hook AND Loop set, 2″ adhesive backed |
1 |
| 026 |
Hook OR Loop strip, 8″ adhesive backed |
2 |
| 027 |
Plastic cable ties |
3 |
| 028 |
Carrying Handle |
1 |
| 029 |
Clamp Nut Head .25 |
1 |
| 030 |
End cap |
1 |
| 031 |
Fan 50mm |
1 |
| 032 |
Fan 60mm |
1 |
| 033 |
Motor End Clamp Cap |
1 |
| 034 |
Motor End Tube Cap |
1 |
| 035 |
Universal Motor Mount |
1 |
| 036 |
seat post clamp body |
1 |
| 037 |
seat post clamp head |
1 |
| 038 |
seat post clamp head w/Hinge |
1 |
| 039 |
Spring Tension Bushing |
1 |
| 040 |
Vent Cover Standard |
2 |
| 041 |
Wrench Part 1 |
1 |
| 042 |
Wrench Part 2 |
1 |
| 043-046 |
Throttle of your choice (Flick Throttle is default) |
(4 Pcs) |
.
Example of Finished Build:
.
.
.
.
INFORMATION BELOW PROVIDED FOR YOUR REFERENCE:
PRODUCT OPTION: Hardware Only
If you own a 3D printer, the associated 3D Printable STL files can be purchased separately on Pinshape.com.
.
Parts Required to build a BoosterPack that are not included:
Pictured: Full BoosterPack Electronics (Not included. Available from 3rd party sellers.)
.
Relevant Video Support/Demonstrations:
Questions or Feedback? Leave a comment below or visit the contact page!
