This kit contains the Assembled 3D Printed AND Hardware parts needed to build the award winning “Bicycle BoosterPack MINI” as seen on EngineerDog.com & Instructables.com.
This kit contains 52 total parts (29 unique parts as listed), with is everything you need to build a mini BoosterPack aside from the electronics which are not included. Please see the video series & Instructables for details on electronics.
The Bicycle BoosterPack Mini is device designed to clamp on to most bikes to provide an electric boost via a friction drive system. The parts in this kit are custom designed and 3D printed with high infill on a professional 3D printer out of black PLA material. All parts are assembled (as much as they can be minus the electronics) and then coated with a UV resistant protective clear coating.
If you own a 3D printer, the associated 3D Printable STL files can be purchased separately on Pinshape.com.
The complete list of required electronics can be purchased from 3rd party suppliers. No engineering required, exactly what you need is recommended in the BOM in the Instructable.
NOTE: The BoosterPack mini is designed with a universal motor mount, so it will fit the 50mm or the 60mm outrunner motor.
PACKING LIST |
Line Item |
Description |
QTY |
001 |
Wrench small half |
1 |
002 |
Wrench big half |
1 |
003 |
Clamp Nut |
1 |
004 |
Spring Tension Bushing |
1 |
005 |
Clamp Tray for ESC |
1 |
006 |
Universal Motor Mount |
1 |
007 |
Fan (50mm & 60mm) |
1 |
008 |
Seat Post Clamp Head |
1 |
009 |
Clamp Head Motor Mount |
1 |
010 |
Cross Dowel |
2 |
011 |
Bolt Seat post clamp |
2 |
012 |
Nut 1/4″ |
1 |
013 |
Nut 1/4″ locking |
1 |
014 |
Shoulder Bolt |
1 |
015 |
Nut 5/16 locking |
1 |
016 |
Set Screw short |
4 |
017 |
Set Screw long |
2 |
018 |
Spring Pin |
1 |
019 |
Spring |
1 |
020 |
Bolt Metric large |
4 |
021 |
Bolt Metric small |
4 |
022 |
Hex Key small |
1 |
023 |
Hex Key large |
1 |
024 |
Split Washer small |
4 |
025 |
Split Washer large |
4 |
026 |
velcro adhesive backed (2″x1.5″) |
1 |
027 |
Zip Tie |
3 |
028 |
Wire Harness (25″) |
1 |
029 |
Velcro Strips 8″ |
4 |
(Device Sold Assembled) |
|
Total Pieces |
52 |
.
OPTIONAL THROTTLE: Contains hardware only (Plastic, spring, button, fastener). Excludes electronics/wire.
.
BoosterPack BOM and Calculations here for reference.
.
.
Parts Required to build a BoosterPack that are not included:

Full BoosterPack Electronics (Not included. Available from 3rd party sellers.)
Relevant Video Support/Demonstrations:
Questions or Feedback? Leave a comment below!